CLBBG - VAN SON RUBBER BASE PLUS INKS

  • MSDS: CLBBG
  • Manufacturer: VAN SON HOLLAND INK CORP
  • Product Name: VAN SON RUBBER BASE PLUS INKS
  • National Stock Number: 7510-01-133-2596
Product Identification

Product ID:VAN SON RUBBER BASE PLUS INKS
MSDS Date:12/01/1988
FSC:7510
NIIN:01-133-2596
Status Code:A
MSDS Number: CLBBG

Responsible Party
VAN SON HOLLAND INK CORP
92 UNION STREET
MINEOLA, NY 11501-3428
US

Emergency Phone: 0000000000

Info Phone: 516-294-8811

Cage: 55269

Contractor
VAN SON HOLLAND INK CORP
MINEOLA, NY 11501-3428 US

Telephone: 516-294-8811

Cage: 55269

Ingredients

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


HYDROTREATED MIDDLE DISTILLATE (PETROLEUM)

CAS: 64742-46-7

RTECS: JN9379645


SYNTHETIC RESINS


VEGETABLE OIL


POLYMERIC WAX BLENDS


ORGANIC PIGMENTS

Hazards

Health Hazards Acute and Chronic:EYES: DIRECT CONTACT MAY CAUSE EYE
IRRITATION. SKIN: PROLONGED CONTACT MAY CAUSE MINOR SKIN
IRRITATION. INGESTION: NOT A NORMAL ROUTE OF ENTRY.
Medical Cond Aggravated by Exposure:PERSONS WITH DERMITITIS SHOULD
AVOID SKIN CONTACT.

First Aid

First Aid:EYE: FLUSH WITH WATER. SKIN: WASH WITH SOAP AND WATER.
INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL AID.

Fire Fighting

Flash Point Method:CC
Flash Point:=121.1C, 250.F
250F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE WATER TO KEEP CONTAINERS COOL. WATER WILL
NOT BE EFFECTIVE IN FIGHTING FIRES.
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE
BURNING.

Accidental Release

Spill Release Procedures:WIPE UP. DISPOSE OF WIPES IN APPROVED WASTE
CONTAINER. IF PETROLEUM HYDROCARBON IS USED, PROVIDE SUFFICENT
VENTILATION.

Handling

Handling and Storage Precautions:AVOID STORAGE IN HOT AREAS. KEEP
CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:READ AND FOLLOW LABEL PRECAUTIONS. DO NOT REUSE
CONTAINER.

Exposure Controls

Respiratory Protection:NOT REQUIRED
Ventilation:GENERAL VENTILATION
Protective Gloves:NOT REQUIRED UNLESS PRESSES ARE WASHED WITH SOLVENT
Supplemental Safety and Health

Chemical Properties

Boiling Pt:=260.C, 500.F
B.P. Text:500-590 F
Vapor Density:+AIR
Spec Gravity:H2O=1 HEAVIER
Evaporation Rate & Reference:BUTYL ACETATE=1 SLOWER
Solubility in Water:INSOLUABLE
Appearance and Odor:BLACK OR COLORED PASTE OILY ODOR
Percent Volatiles by Volume:10-30

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE DONE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.